is a CFD solver for simulation of fluid flow on the mesh-free Lagrangian frame. The
code is based on the MPS (Moving Particle Semi-implicit) method. The code has
been developed by
Dr. Ahmad Shakibaeinia
at the Faculty of Engineering & Applied Science,
University of Regina
, under supervision of
Dr. Yee-Chung Jin
The code has been developed over a number of years. Primarily it was to study
free-surface open-boundary flow phenomena with large deformation of boundaries
and interfaces where Eulerian methods (such as FEM and FVM) have difficulties.
Later, the model the was developed for Multiphase flow, non-Newtonian flow,
Granular flow. The model is still development. For more detail see the
A. Shakibaeinia, and Y.C. Jin, (2011) A Mesh-free
Particle Model for Simulation of Mobile Bed Dam Break. Advances in
Water Resources, 34(6):794- 807 (doi:10.1016/j.advwat
A. Shakibaeinia, and Y.C. Jin, (2011) A MPS Based
Mesh-free Particle Method for Open Channel flow. Journal of
Hydraulic Engineering, ASCE, 137 (11) (doi: 10.1061/(ASCE)
A. Jabbari-Sahebari, Y.C. Jin and A. Shakibaeinia,
(2010) Flow over sills by the mesh-free particle method. Journal of Hydraulic Research, 49(5): 649–656.
A. Shakibaeinia, and Y.C. Jin, (2010) A Weakly
Compressible MPS Method for Modeling of Open Boundary Free-surface
Flows. International Journal for Numerical Methods in Fluid, 63
(10):1208–1232 (doi: 10.1002/FLD.2132).
A. Shakibaeinia, and Y.C. Jin, (2011) Multiphase
Modelling of Sand Discharging into Tank. Proceeding of THESIS-2011 -
Symposium on Two-phase Modelling for Sediment Dynamics in
A. Shakibaeinia, and Y.C. Jin, (2009) Lagrangian
Modeling of Flow over Spillways Using Moving Particle Semi-Implicit
Method. Proceeding of 33 Rd IAHR Congress, Vancouver, Canada.